If you have spotted foggy patches or a milky haze trapped between the panes, the good news is you usually have options. A double glazing repair that swaps just the misted sealed unit is often far cheaper than a whole new window, but not always the right call. Here is how to tell the difference.
Every sealed unit is two (or three) panes of glass with a spacer bar and a dry, still gap in between. That gap is sealed at the factory and often filled with argon gas to slow heat loss. Over the years the perimeter seal can break down, especially on south-facing windows that bake in the sun and cool sharply overnight. Once the seal fails, moist air creeps in, and when it cools you get condensation you simply cannot wipe away because it sits inside the glass.
Misting is not a sign the whole window is failing. The frame, hinges and locks can be in great shape while only the glass unit has given up. That is why a targeted repair is worth considering first.
The honest answer is that it depends on a few things. Here is what we weigh up on a York job.
In these cases a glazier can measure the failed unit, order a matching replacement and swap it into the existing frame. It is quicker, cheaper and creates less mess. Our window and door repairs team handles this kind of job all over York and North Yorkshire.
If the frames are on their way out, spending money on new glass alone is a bit like putting new tyres on a car with a failing engine. In that situation new uPVC windows can pay you back in comfort and lower heating bills.
Prices vary a lot with size, glass type and access, so treat these as rough guides rather than a quote. As of 2026, replacing a single misted sealed unit commonly lands somewhere between about 60 and 180 pounds fitted for a standard pane, with larger or specialist units (toughened, obscure, decorative or triple glazed) costing more. A full replacement window, frame and all, typically runs from roughly 400 to 900 pounds and up depending on size, material and finish.
The only way to know your real figure is to have someone measure up and look at the frames. You can request a free quote and we will give you a straight answer on whether a repair or a replacement is the better spend.
Book someone to take a proper look if:
A quick assessment costs you nothing but tells you whether you are looking at a small glass swap or a bigger job. Getting that call right saves money either way.
Replacement sealed units usually come with their own guarantee, often around five to ten years against misting, though terms differ by supplier, so check what yours covers. If you replace whole windows, the work normally needs to meet current Building Regulations and be registered (for example through FENSA) or signed off by building control. Rules do change, so confirm the current requirements with your installer or local authority before work starts.
Yes, in most cases. If the frame is sound, a glazier can replace just the failed sealed unit and leave the existing frame in place, which is cheaper and quicker than a full window.
As a rough 2026 guide, a standard sealed unit often costs between about 60 and 180 pounds fitted, with larger, toughened or decorative glass costing more. Get a quote for your exact sizes.
It means the seal on that glass unit has failed and let moisture in. The frame, hinges and locks may still be perfectly fine, so it is often a glass-only fix.
If the frames are tired, draughty or single glazed, new windows usually give better comfort and lower bills. If the frames are modern and solid, a sealed unit swap is the sensible choice.
Once the new unit is made to measure, fitting a single pane is usually a job of well under an hour per window, though timing depends on size and access.
Not sure which way to go? Download our latest brochure to see the full range of window styles and finishes, or request a free quote and we will pop out to take a look.